Как сделать скин в unturned
Как сделать скин в unturned
Заходим в Survivors
Здесь есть 5 строчек из которых 1 не активна, самая первая строчка показывает сколько у вас металлолома (Scrap)
Вуоля, теперь у вас есть 1 Scrap
После того как переделали свои вещи и получили металлолом (Scrap) вы можете крафтить вещи
Из 2 строчки выпадают дешевые скины с большим шансом,но есть маленький шанс получить скин более хорошего качества
Из 3 строчки выпадают тоже дешевые скины с большим шансом,но есть маленький шанс получить скин более хорошего качества
Из 4 строчки выпадают уже более дорогие скины
Из 5 строчки тоже выпадают более дорогие скины
Как сделать скин в unturned
You will need to download 3 different software:
You can choose between Gimp and Photoshop, however photoshop is paid for.
Open up Unity, and create a new 3D project. You might need to login first.
Once there, you will need to open up the Unturned folder.
Go to Steam, right click Unturned, and hit
Properties>localfiles>browse local files
Then from there,
Bundles>Sources>Skins
Select all those folders and drag them into Unity. You might need to do them one at a time, but thats okay.
Check all of the arrows, and go into «Guns.»
Now find yourself the gun you want to make your skin for. Any will do.
Double click on Model_Source, and it should bring up Blender.
Now press tab, and everything should be highlighted in yellow, like this.
Click on UV’s down at the bottom, and select «Export UV Layout.»
Now we need to set the name to «Layout_#x#»
Large gun: # = 2048
Small gun: # = 1024
Next, set the resolution to the number above and set the fill opactiy to zero.
Good job, you’re getting there. Just a few more steps and you can get to drawing!
Now create a Gimp or photoshop image with the resolution we showed earlier.
Head back into Unity. Right click on «Albedo,» and hit «Show in explorer.»
Drag the Albedo into it, and also the Layout_1024x1024.png.
Now get yourself making a good looking skin! You can check the different parts of the Layout by heading into Blender, and right clicking on any of the gun parts.
When you feel ready to export it, save it and export it under a name to the same folder as the Albedo.
Now head back into Unity. It should take a moment to refresh, and then you should see your image in the same folder as the Albedo.
Now while in Unity, drag out a «Model_0» or «Model_1» into the scene. You can move around by holding right click and using WASD.
Drag your image out into the scene and onto the model. It should apply.
You will need to export the image every time you change it, and then it should refresh automatically in Unity.
I’m assuming you have a basic knowledge of how image editing works, so just follow the basics and you’ll be fine.
Wow! You’ve just made a badass skin. Whadya gonna do now?
Well, we need to upload it to the steam workshop at some point. Lets take some screenshots.
Zoom around Unity, getting lots of delicious screencaps by hitting Windows+PrtSc to take screenshots.
Then open it up in Paint, crop the image, and make the background a solid colour.
Now load your screenshots up in your photo editor, in a 1280×720 resolution.
I personally like to just delete the background and add a pattern to the backdrop, like here.
Do this with 4-5 screenshots, and have them ready for the upload.
Next step is to get your items out there!
First step is to create two folders: One «Preview» and one «Texture»
I have mine set up on my desktop next to mah kittey kat:
Now remember this, because this is very important.
You need to have the folder set up exactly like this. With Texture>Folder>SkinAlbedo
Make sure the skin albedo is inside.
Now put all of your screenshots into the preview folder.
Open up Unturned, Go to Workshop, and click «upload»
You need to set all of the values like I have below. Make sure to select these things:
— Skin
— Curated
— Name of your gun you made the skin for
— Private
Also add the Texture file, Make sure to only leave it as Texture. Do not go into the subfile, etc.
Once you’re done, click Create. It will take a minute to load so just be patient.
If it says Failed to Submit, you did something wrong, you silly goose. Check the values.
Now we need to open it up on a webpage. Copy the link and open it in Chrome.
You can add your screenshots here, on this page.
Next, when you have editied your description, added images, and feel so godamn confident to release your creation to the world, change the publicity to public.
Congrats, you did it. You are a winner. Now wait for all the people to vote yes, get your skin added, and rake in revenue.
Thank you so much for reading this guide! I can’t wait to see what kind of skins everyone creates!
If you have any questions, feel free to add me. It can be about anything.
Как сделать скин в unturned
Working with my friend Vipes, we wanted to revitalize his awesome Augmented skin series. We started with the Ace and made a custom mesh so that the skin would f.
«With the rise of mega zombies accompanying hordes of standard zombies, the Coalition needed a weapon capable of dealing significant damage fr.
Camofrost Maplestrike, re-polishing.
The Bluntforce is one of my favorite shotguns in the game, so it’s fitting that I’d give it.
This skin features a simplistic red design with a low polygon texture.
This is the third reskin of the Aftermath collection.
Which software do you use?
Editing: Photoshop CC 2014
Uv and 3d Tool : Blender and Unity.
This skin is only available in the September 2017 Workshop Crate #4.
«Task Unit 87 was a Coalition-based multi-national group of elite soldiers, visually distinct by their double yellow stripe featured on t.
(UPDATE) It’s online 🙂 Thank you very much for all the support!
Long-range anti-material magnetic rifle for space marines.
Created using Blender/Cycles, Photoshop.
If you would like to see this skin in-game, please press «Yes» and leave some feed.
Made by a japanese company for full protection.
This skin is only available in the April 2017 Workshop Crate #2.
Warning, heavly used in a zombie apocalypse. (May the Hawkhound be with you!)
The eagle strikes from above.
This variant came about when I was experimenting with different color variations of my original Guardian Eagle Swissgewehr. The red and white worked so well that I immediately stopped working on other colo.
The eagle watches from above.
Another custom mesh skin, this time something less realistic and more fantasy! I had the idea of adding wing-like parts on the barrel cover for the Swissgewehr since its barrel cover was more prominent tha.
Sends shivers down your enemy’s spine.
This skin is only available in the January 2017 Workshop Crate #1.
Engineers recently experimented with the idea of swapping the batteries that power the Fury’s electric gatling motors out for a portable thermonuclear power plant. Apparently, it worked.
The Supercharged Hell’s Fury has a slate grey and electr.
This skin features a simplistic red design with a low polygon texture.
Which software do you use?
Editing: Photoshop CC 2014
Uv and 3d Tool : Blender and Unity.
Created using Blender/Cycles, Photoshop.
If you would like to see this skin in-game, please press «Yes» and leave some feedback.
Some time after the infection, Coalition forces launched a massive offensive to take back barren cities from the zombie horde. Many assault divisions were formed in order to form a cohesive fighting force.
With their weapons sporting digital camo, m.
This skin features a simplistic red design with a low polygon texture.
This is the fourth reskin of the Aftermath collection.
Which software do you use?
Editing: Photoshop CC 2014
Uv and 3d Tool : Blender and Unity.
— Photoshop
— Unity
— Blender
— Cinema 4D (C4D).
Very hot and glowing. Dont touch it!
This is my first skin hope you like it as i do.
An armored-up chainsaw to cut through even the toughest of zombies. Please consult manual before rampage.
Like this skin? See this and 55+ other skins I’ve made in my collection below!
Only the strong evolve.
Some time after the infection, Coalition forces launched a massive offensive to take back barren cities from the zombie horde. Many assault divisions were formed in order to form a cohesive fighting force.
With their weapons sporting digital camo, m.
(UPDATE) It’s online 🙂 Thank you very much for all the support!
Long-range rifle for night snipers. If you hear the howl, you shold run.
Created using Blender/Cycles, Photoshop.
If you would like to see this skin in-game, please press «Yes» and le.
Once converted, the cobra will never leave your side.
Based on the bullpup conversion kit for an airsoft Glock, I wanted to make a custom mesh Cobra in a similar vein as my Stabilized Colt, which was recently accepted into the game. I adore the a.
Haven’t done a space-themed skin in a while! I decided to make a skin for the Scalar since it’s the most sci-fi looking weapon in the entire game. For the custom mesh, I heavily modified the stock and the area where the magazine is inserted.
Three skins in one(maple,pine and birch). My «Makeshift Rifle» variation was inspired by post apocalyptic theme.
Upgraded Baseball Bat
I hope you like it!
Damage caused by extreme cold.
I hope you like it.
Powered by magic liquid from blowtorch.
Inspired by post apocalyptic theme.
Warning: Music may be lethal.
Highly used in Deadzone.
Skin is inspired by Biohazard bodysuit. 122 is Item ID of Zubeknakov.
I hope you like it.
Please vote yes if you want to see this in-game!
The Sketchfab preview also shows the animation effect
Features:
LOD group for game optimisation
The screen glows in dark
Glitch animation
No promises that there will be the glitch animation in th.
Multihawk and I had this in the works for a while, and we wanted to make this Katana custom mesh special by using lightning as our theme. The bright blue strip that’s protruding the edge of the blade were inspired from the protruding las.
With help of Debski we made Custom Mesh Ace, with design of an animal.
I hope you like it!
Don’t let pesky armor stand in your way, blast right through it with this stylish skin!
If you want to see this skin added to the game, click the ‘Yes’ button above!
[Disclaimer: This skin will not grant you additional damage.].
Powered by magic liquid from blowtorch.
Inspired by post apocalyptic theme.
«Division is group of young armed men that are ready to die for their land!»
It’s ingame thanks to all of you!
buy it here: Cryptic Eaglefire
«Ryuu ga waga teki wo kurau»
Only the best equipment for the VEX professionals!
Created using Blender/Cycles, Photoshop.
If you would like to see this skin in-game, please press «Yes» and leave some feedback.
First one in Earth Protectors Series. I always wanted to make skin that would fit some secret agency, and I decied to make one.
I hope you like it!
A custom mesh baseball bat inspired from some of the brutal melee weapons of World War 1.
Like this skin? See this and 60+ skins I’ve made in my collection below!
[COOL DESCRIPTION FOR COOL PEOPLE]
The thrill of racing is something I think we can all enjoy. That’s why we at Midas Inc. host the monthy death race every second monday. You’ve probably seen it on TV.
Anyway, who cares, right? Well check out this gu.
«Only thing Demons fear.»
Well Halloween is coming, wanted to make something aggressive.
I hope you like it.
Diffrent from your regular Sci-Fi skin.
Colors all around.
The DreamZ Vonya.
Created using:
• Unity
• Blender
• Photoshop
If you would like this to be in-game, be sure to vote yes.
Thanks.
a guide to complete annihilation
Custom mesh Sci-fi Themed Flashlight skin.
Rate and share with friends if you like it! 🙂
A modern purple skin with a gradient look and various speckles.